IBM C2010-511 Exam Sample, Offer IBM C2010-511 PDF Exams UP To 50% Off

100% Valid IBM C2010-511 exam questions and answers are tested and approved by Microsoft experts. Furthermore, we are constantly updating our IBM https://www.pass4itsure.com/c2010-511.html exam dumps,100% guarantee in quality and reliability.

QUESTION 1
Which backup method is optimized for use when the backup exceeds the backup window, the files being backed up have relatively little daily change and not having to scan the file system looking for changed files would benefit the backup window?
A. Selective backup
B. Journal-based backup
C. Full incremental backup
D. Partial incremental backup

Correct Answer: B
QUESTION 2
In the Primary Storage Pool definition, autocopy=migrate is defined in FILEPOOL2 and TAPEPOOL. What are two consequences if the target (next) storage pool in a hierarchy (FILEPOOL2) cannot contain the data being migrated, and it is necessary to overflow to its next storage pool (TAPEPOOL)?

A. Simultaneous write is disabled.
B. TAPEPOOL inherits the copy pool list for FILEPOOL2.
C. The server uses the inheritance model to create the copies.
D. COPYPOOL2 is used because it is defined to TAPEPOOL.
E. COPYPOOLI1 and COPYPOOL2 is used because the definitions of FILEPOOL2 and TAPEPOOL are inherited.

Correct Answer: D
QUESTION 3
What is required when using IBM Tivoli Storage FlashCopy Manager (FCM) for VMware from a Virtual Server?
A. The operating system for the virtual server must be Windows.
B. All virtual servers that are part of the hardware snapshot must be backed up to TSM.
C. If a VM is used as the proxy host, this VM must not be stored on a datastore being backed up by FCM.
D. A restore of a virtual servers from a data store backup can only be restored to the data store the backup was performed against.

Correct Answer: A QUESTION 4
Migration is using only one tape but more tape drives are available. Which stgpool option should be reviewed?
A. drives
B. numdrives
C. migprocess
D. mountpoints

Correct Answer: C QUESTION 5
Which file is required when performing disaster recovery of an IBM Tivoli Storage Manager V7.1 server?
A. dsmserv.sys
B. volume history
C. recovery instructions
D. database system log

Correct Answer: B QUESTION 6
There are NAS filers that need long term archival retention of some but not all files. Which two actions will resolve this in IBM Tivoli Storage Manager?
A. UseaCIFSorNFStomounttheNASvolumes.
B. Use the Backup-Archive client with the Archive function.
C. Use the NDMP backup function with the Archive option.
D. Use the Backup-Archive client with the SNAPDIFF option.
E. Use the SnapMirror to Tape function to protect the the NAS volumes.

Correct Answer: AB QUESTION 7
Which device type must be used to define a copy pool that is configured for deduplication?
A. NAS
B. FILE
C. DISK
D. TAPE

Correct Answer: B QUESTION 8
Which statement is true regarding a vStorage Backup Server?
A. It only supports backup to disk.
B. It supports only backup over LAN.
C. It can be a virtual or a physical machine.
D. It allows virtual machine full backups and incremental file level backups.

Correct Answer: C QUESTION 9
Which task or process can be included in an administrative schedule?
A. client backup
B. import database
C. ingestion of data
D. database backup

Correct Answer: D
QUESTION 10
What is the purpose of the option clusternode yes?
A. It uses a cluster node as proxy node for backups.
B. It configures IBM Tivoli Storage Manager (TSM) to back up the primary node first.
C. It allows multiple TSM clients to backup a single disk resource.
D. It specifies how the TSM Backup-Archive client manages cluster drives.

Correct Answer: C
QUESTION 11
What should the volume’s access be set to for tapes created in a copy storage pool and moved to a disaster recovery location?
A. offline
B. offsite
C. readwrite
D. drlocation

Correct Answer: B
QUESTION 12
Which scheduling mode provides the IBM Tivoli Storage Manager administrator with the most control over backup scheduling?
A. client polling
B. server prompted
C. session initiation
D. enhanced schedules

Correct Answer: B
QUESTION 13
A customer is upgrading their environment from IBM Tivoli Storage Manager (TSM) V5.5 to TSM V7.1. Which three new skills are required for the existing storage administrator with system privileges?
A. defining DB2 volumes
B. defining database space
C. defining active data pools
D. managing recovery log volumes
E. managing a database reorganization
F. managing multiple stream database backups
Correct Answer: ADF
QUESTION 14
What happens to the client data with the encryptkey option and include.encrypt options?
A. Data will be encrypted by the Tivoli Storage Manager (TSM) server.
B. All file spaces from the TSM server will be encrypted.
C. Encrypted data will be backed up directly from the filesystem.
D. Data will be encrypted at the client before sending it to the TSM server.

Correct Answer: D
QUESTION 15
Which three steps must be completed so SERVER-A and SERVER-B can use SSL to communicate?
A. Each server must specify COMMMETHOD SSL in its options file.
B. Each server must be defined to the other specifying the SSL=YES parameter.
C. Both servers must be restarted after configuring the appropriate SSL parameters.
D. Each server’s password must be replaced just prior to defining them to each other.
E. The partner certificate of SERVER-B must be manually imported on SERVER-A and that of SERVER_A on SERVER-B.
F. The administrative ID used to perform the DEFINE SERVER commands must have the same PASSEXP attribute value on both servers.

Correct Answer: ABC
QUESTION 16
Why is validate policyset run before activate policyset?
A. To verify if the definitions are consistent.
B. To verify that the policies can be overwritten.
C. To verify that the active policyset is not in use.
D. To verify permissions are available to change the policies.

Correct Answer: A
QUESTION 17
After the initial configuration of IBM Tivoli Storage Manager Operations Center, which two At Risk status settings can be changed?
A. time since last node replication
B. time since last copypool backup
C. time since last spoke replication
D. time since last application backup
E. time since last virtual machine backup
Correct Answer: BC
QUESTION 18
How is the IBM Tivoli Storage Manager (TSM) V7.1 administrative client installed?
A. It is an option during the client installation.
B. It is an option during the server installation.
C. It is installed by default with the TSM client.
D. It is installed by default with the TSM server.

Correct Answer: D
QUESTION 19
Which two actions must be done to introduce a new LTO5 tape drive into an existing SCSI library with LTO2?
A. define the library
B. define a devclass
C. define the LTO2 drives
D. define the LTO5 drives
E. define a storage pool utilizing a devclass for LTO2

Correct Answer: BD
QUESTION 20
Why would an IBM Tivoli Storage Manager (TSM) trace be run?
A. To find a lost encryption key.
B. To filter messages from the active log.
C. To help troubleshoot at the request of Level 2 Support.
D. To check the data path between the TSM client and server.

Correct Answer: D
QUESTION 21
What happens during the configuration of a spoke server in the IBM Tivoli Storage Manager Operations Center?
A. A new server group will be defined for command routing.
B. An existing server group will be used for command routing.
C. The spoke server will be defined in a new server group for command routing.
D. The spoke server will be added to an existing server group or a new server group will be created.

Correct Answer: D
QUESTION 22
What is a function of Automated System Recovery (ASR) in IBM Tivoli Storage Manager?
A. It restores the ASR database to its last known state.
B. It automatically performs ASR database backups at a set interval.
C. It backs up ASR files in preparation for recovering the AIX disk configuration information and system state in the event of a catastrophic system or hardware failure.
D. It backs up ASR files in preparation for recovering the Windows disk configuration information and system state in the event of a catastrophic system or hardware failure.
Correct Answer: D
QUESTION 23
Which statement is true for a tape device to be defined to the Tivoli Storage Manager (TSM) server?
A. TSM requires a tape library for drives to be used.
B. If it is a SCSI tape then no special steps are required.
C. The drive must be SAN connected and zoned to the TSM server.
D. The proper adapter card and correct device driver must be installed.
Correct Answer: A
QUESTION 24
What does this command do: dsmc archive “/home/tsm/prod/” -v2archive?
A. It archives files in the /home/tsm/prod directory and the tsm or prod directories.
B. It archives only files in the /home/tsm/prod directory but not the tsm or prod directories.
C. It archives all the files in /home/tsm/prod/ including the subdirectories using the management class v2archive.
D. It archives only the files in /home/tsm/prod/ including the subdirectories using the management class
v2archive. Correct Answer: B QUESTION 25 Where does deduplication processing take place with client-side deduplication enabled on the Tivoli Storage Manager server?
A. on the server only
B. on the Backup-Archive client only
C. on both the Backup-Archive client and the server
D. on the server but the client maintains the deduplication list

Correct Answer: C QUESTION 26
What is the function of reconciliation in IBM Tivoli Storage Manager (TSM)?
A. It removes obsolete data from the TSM database.
B. It logs orphan stubs and deletes obsolete copies of files.
C. It removes orphan stub files from the TSM server database.
D. It repopulates orphan stubs and deletes obsolete copies of the files.

Correct Answer: B QUESTION 27
Which device class type supports IBM Tivoli Storage Manager deduplication?
A. LTO
B. FILE
C. DISK
D. SERVER

Correct Answer: B QUESTION 28
What are two considerations when planning for an active data pool?
A. Retention period for the data.
B. Number of versions of data to keep.
C. Usage of dedup for the active data pool.
D. Usage for fast restore or disaster recovery.
E. Usage of LAN-free techniques for the active data pool.

Correct Answer: BD QUESTION 29
The IBM DB2 command runstats performs which function?
A. It reorganizes the IBM Tivoli Storage Manager (TSM) database.
B. It resets the TSM database table schema.
C. It updates statistics on tables and indexes.
D. It displays statistics on the database and indexes.
Correct Answer: C QUESTION 30

IBM C2010-511 exam only advanced and equipped with much more features,it is also not internet dependent,once installed.It enables you to see Interconnecting Cisco Networking Devices in a simulated IBM C2010-511 exam environment.Working with IBM https://www.pass4itsure.com/c2010-511.html exam Interactive Testing Engine is like passing an actual IBM C2010-511 exam.